ADTRAN AOS Version R10.1.0 Command Reference Manual page 333

Command Reference Guide
debug lldp
Use the debug lldp command to display debug output for all Link Layer Discovery Protocol (LLDP)
receive and transmit packets. Debug messages are displayed (real time) on the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages. Variations of this command include:
debug lldp
debug lldp rx
debug lldp rx verbose
debug lldp tx
debug lldp tx verbose
debug lldp verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
rx
tx
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 8.1
Usage Examples
The following example activates both transmit and receive messages associated with LLDP operation:
>enable
#debug lldp
60000CRG0-35E
Optional. Shows information about received packets.
Optional. Shows information about transmitted packets.
Optional. Shows detailed debugging information.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
333