Command Reference Guide
debug stack
Use the debug stack command to enable switch-stacking debug messages. Debug messages are displayed
(real time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug
messages.Variations of this command include:
debug stack
debug stack switch
debug stack verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
switch
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 8.1
Usage Examples
The following example activates the possible debug stack messages:
>enable
#debug stack switch
#debug stack verbose
60000CRG0-35E
Optional. Enables messages specific to the stack ports (stack switch
application program interface (API) information).
Optional. Enables detailed messages specific to the stack protocol.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
367