ADTRAN AOS Version R10.1.0 Command Reference Manual page 957

Command Reference Guide
hmr set public-variable <variable> new-value <pattern>
Use the hmr set public-variable command to specify a public variable to be used with Session Initiation
Protocol (SIP) header manipulation rule (HMR) configurations. Use the no form of this command to
remove the public variable.
Public variables for SIP HMR can be set globally using this command, or from the HMR
Message Rule Configuration Mode (refer to
more information).
Syntax Description
<variable>
<pattern>
Default Values
By default, no public variables are configured.
Command History
Release R10.1.0
Functional Notes
For more information about the creation and use of public variables in SIP HMR, refer to the configuration
guide Manipulating SIP Headers and Messages in AOS, available online at
https://supportforums.adtran.com
Usage Examples
The following example sets the value of the public variable paiTest:
(config)#hmr set public-variable paiTest new-value match
60000CRG0-35E
Specifies the variable to be set.
Specifies the new value to be used by the variable. The pattern can be a
regular expression (regex) or a text string.
Command was introduced.
(article number 3526).
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
SIP HMR Command Set on page 3338 for
957