Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
ip sip authenticate
Use the ip sip authenticate command to enable the Session Initiation Protocol (SIP) server authentication.
Use the no form of this command to disable the feature.
Syntax Description
No subcommands.
Default Values
By default, the SIP server authentication is disabled.
Command History
Release 9.1
Command was introduced.
Usage Examples
The following example enables the SIP server authentication:
(config)#ip sip authenticate
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1109
Advertisement
Table of Contents
