Debug Ip Rip - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

debug ip rip

Use the debug ip rip command to activate debug messages associated with Routing Information Protocol
(RIP) operation in AOS. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages. Variations of this command include:
debug ip rip
debug ip rip events
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
events
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 1.1
Functional Notes
The debug ip rip command activates debug messages to provide information on RIP activity in AOS. RIP
allows hosts and routers on a network to exchange information about routes.
Usage Examples
The following example activates debug messages associated with RIP activity:
>enable
#debug ip rip
60000CRG0-35E
Optional. Displays only RIP protocol events.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
304