ADTRAN AOS Version R10.1.0 Command Reference Manual page 804

Command Reference Guide
show voice named-digit-timeouts
Use the show voice named-digit-timeouts command to view configured named digit timeouts (NDTs)
and their values. The output for this command includes the default NDT value. Variations of this command
include:
show voice named-digit-timeouts
show voice named-digit-timeouts <name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release A2
Usage Examples
The following example displays all named digit timeouts and their timeout value:
>enable
#show voice named-digit-timeouts
Name
--------------------------------------------------------------------------------
default
long
longer
longest
short
shorter
shortest
60000CRG0-35E
Optional. Displays information about a specific named digit timeout.
Command was introduced.
Timeout Value (secs)
4
10
12
16
6
5
2
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
804