ADTRAN AOS Version R10.1.0 Command Reference Manual page 1147

Command Reference Guide
ip sip proxy local-gateway <hostname | ip address>
Use the ip sip proxy local-gateway command to configure the local Session Initiation Protocol (SIP)
gateway. Use the no form of this command to disable this feature. Variations of this command include:
ip sip proxy local-gateway <hostname | ip address>
ip sip proxy local-gateway <hostname | ip address> tcp
ip sip proxy local-gateway <hostname | ip address> tcp <port>
ip sip proxy local-gateway <hostname | ip address> udp
ip sip proxy local-gateway <hostname | ip address> udp <port>
Syntax Description
<hostname | ip address>
tcp
udp
<port>
Default Values
By default, the ip sip proxy local-gateway is not configured. When configured, the default protocol is udp
on port 5060. If a particular protocol is configured and no port is specified, the default port is set to 5060.
Command History
Release 17.3
Functional Notes
The ip sip proxy local-gateway command enables the necessary local SIP gateway in AOS data
products. This gateway is necessary for routing emergency calls when using SIP proxy. On AOS voice
products, the local gateway is enabled by default.
Usage Examples
The following example sets the local gateway:
(config)#ip sip proxy local-gateway serviceprovider@network.com
60000CRG0-35E
Specifies the host name or IP address of the local SIP proxy gateway. IP
addresses should be expressed in dotted decimal notation (for example,
10.10.10.1).
Optional. Configures the gateway to use Transmission Control Protocol
(TCP).
Optional. Configures the gateway to use User Datagram Protocol (UDP).
Optional. Specifies the TCP or UDP port used by the gateway. Range is 1 to
65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1147