ADTRAN AOS Version R10.1.0 Command Reference Manual page 869

Command Reference Guide Global Configuration Mode Command Set
To use RADIUS servers to perform Enable mode authentication, the RADIUS servers must be configured
prior to creating the method list. You can configure all RADIUS servers in the system using the command
radius-server on page 1300. You can configure individual RADIUS servers using the command
radius-server host on page 1302. Once the RADIUS servers have been configured, you can use all
RADIUS servers for authentication by using the group radius method. If you only want to use some of the
available RADIUS servers for authentication, you can create a named server group and add the RADIUS
servers to the group. Server groups are created using the command aaa group server on page 886 and
servers are added to the group as outlined in the RADIUS Group Command Set on page 3296.
For more information about AAA authentication, or AAA configuration in general, refer to the Configuring
AAA in AOS configuration guide available online at https://supportforums.adtran.com.
Usage Examples
The following example specifies using the line password as the first method of authentication and using the
Enable mode password as the second:
(config)#aaa authentication enable default line enable
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 869