ADTRAN AOS Version R10.1.0 Command Reference Manual page 934

Command Reference Guide
desktop-auditing timeout <days>
Use the desktop-auditing timeout command to specify the amount of time that the AOS unit keeps
network access protection (NAP) information collected through desktop auditing. Use the no form of this
command to return to the default timeout period.
Syntax Description
<days>
Default Values
By default, desktop auditing is set to timeout in 0 days, meaning the collected NAP information is stored
indefinitely.
Command History
Release 17.8
Functional Notes
Desktop auditing is an AOS feature that collects NAP information through NAP messages sent in Dynamic
Host Configuration Protocol (DHCP) messages between clients connected to the network and the network
server.
Desktop auditing is configured by enabling the feature (using the desktop-auditing dhcp command) and
by configuring filters to limit the output of the collected NAP information. Information is limited by specifying
local desktop auditing policies. The configuration of these policies is outlined in
Policy Command Set on page
Desktop Auditing in AOS configuration guide available online at https://supportforums.adtran.com.
There is a storage limit of 2000 NAP entries on the AOS unit. When this limit is reached, new entries
overwrite the old entries.
Usage Examples
The following example specifies that NAP information collected by desktop auditing will expire in 7 days:
(config)#desktop-auditing timeout 7
60000CRG0-35E
Specifies the amount of time (in days) that desktop auditing stores collected
NAP information. Range is 0 to 49710.
Command was introduced.
3037. For more information about desktop auditing, refer to the Configuring
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Desktop Auditing Local
934