ADTRAN AOS Version R10.1.0 Command Reference Manual page 634

Command Reference Guide
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following is sample output from the show ipv6 policy-sessions command and displays information
for IPv6 ACPs:
>enable
#show ipv6 policy-sessions
NOTE: The "Layer 4" info below for TCP and UDP is source port and dest port. For ICMPv6, it is ID and
type/code. For all other protocols, it is unused.
Src VRF (if not default), Src policy-class:
Protocol (TTL) -> Dest VRF, Dest policy-class
Src IPv6 Address
Dest IPv6 Address
------------------------
Ipv6 policy-class PRIVATEV6:
icmpv6 (59) -> self
2001:DB8:1:1::2
2001:DB8:1:1::1
60000CRG0-35E
Layer 4
Layer 4
----------
0
128/0
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
634