ADTRAN AOS Version R10.1.0 Command Reference Manual page 355

Command Reference Guide
debug restore
Use the debug restore command to restore the last saved debug filters to the unit.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 17.4
Functional Notes
This command is used to restore filters saved using the command
saved filters without restoring them to the unit, use the show debugging saved-filters command (refer to
show debugging on page
Usage Examples
The following example restores previously saved debug filters on the AOS unit:
>enable
#debug restore
Restoring saved debug filters...
Filters to restore:
debug mail-client agent
debug probe test1
Running restoration script...done
60000CRG0-35E
Command was introduced.
463).
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
debug save on page 356. To view the
355