ADTRAN AOS Version R10.1.0 Command Reference Manual page 1154

Command Reference Guide
ip sip proxy user-template <name>
Use the ip sip proxy user-template command to create a Session Initiation Protocol (SIP) proxy user
template and enter the proxy user template configuration mode. Use the no form of this command to
remove the template. Refer to the
Syntax Description
<name>
Default Values
By default, this feature is disabled.
Command History
Release A4.01
Functional Notes
Additional information is available in the following sections of this guide:
For more information about SIP proxy, refer to the command
information about transparent proxy, refer to the command
For more information about SIP proxy, refer to the configuration guide Configuring SIP Proxy in AOS
(article number 2183) available online at https://supportforums.adtran.com.
Usage Examples
The following example creates a proxy user template named Set1 and enters the proxy user template
configuration mode:
(config)#ip sip proxy user-template Set1
(config-template-Set1)#
60000CRG0-35E
Proxy User Template Command Set on page 3865
Specifies the name of the proxy user template being created.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip sip proxy on page 1129. For more
ip sip proxy transparent on page
for more information.
1153.
1154