ADTRAN AOS Version R10.1.0 Command Reference Manual page 1095

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ip rtp quality-monitoring threshold loss
Use the ip rtp quality-monitoring threshold loss command to specify the threshold values for logging
packet loss events during voice quality monitoring (VQM). When more loss is detected in the Realtime
Transport Protocol (RTP) than the specified event threshold, an event message is generated. Use the no
form of this command disables the event reporting for that message type and threshold. Variations of this
command include:
ip rtp quality-monitoring threshold loss error
ip rtp quality-monitoring threshold loss error <value>
ip rtp quality-monitoring threshold loss info
ip rtp quality-monitoring threshold loss info <value>
ip rtp quality-monitoring threshold loss notice
ip rtp quality-monitoring threshold loss notice <value>
ip rtp quality-monitoring threshold loss warning
ip rtp quality-monitoring threshold loss warning <value>
Syntax Description
error
info
notice
warning
<value>
Default Values
By default, the lost packets thresholds are info 0, notice 25, warning 50, and error 100.
Command History
Release 17.1
Usage Examples
The following example enables VQM lost packet info messages to be logged if loss occurs above 10
packets:
(config)#ip rtp quality-monitoring threshold loss info 10
60000CRG0-35E
Specifies the threshold for lost packets error messages to be logged.
Specifies the threshold for lost packets information messages to be logged.
Specifies the threshold for lost packets notice messages to be logged.
Specifies the threshold for lost packets warning messages to be logged.
Optional. The range is 0 to 30000.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1095

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents