ADTRAN AOS Version R10.1.0 Command Reference Manual page 1160

Command Reference Guide
ip sip timer registration-failure-retry <value>
Use the ip sip timer registration-failure-retry command to configure the time (in seconds) that will
elapse before a Session Initiation Protocol (SIP) endpoint will retry registration with the SIP server after a
registration failure has occurred. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the registration-failure-retry timer is set to 60 seconds.
Command History
Release 11.1
Usage Examples
The following example allows a retry attempt to begin after 32 seconds:
(config)#ip sip timer registration-failure-retry 32
60000CRG0-35E
Specifies time in seconds. Range is 10 to 604800 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1160