ADTRAN AOS Version R10.1.0 Command Reference Manual page 1044

Command Reference Guide Global Configuration Mode Command Set
ip mgcp bracketed-ip
Use the ip mgcp bracketed-ip command to prevent bracketed IP address format from being used in
specifying Media Gateway Control Protocol (MGCP) endpoint names. Use the no form of this command
to disable the bracket requirement when entering MGCP endpoint IP addresses.
Syntax Description
No subcommands.
Default Values
By default, brackets are used when specifying MGCP endpoints.
Command History
Release A2 Command was introduced.
Functional Notes
Some call agents require that brackets be used when an MGCP gateway uses an IP address as its local
domain name, and some call agents do not support the bracketed format. Bracketed IP addresses are
displayed as endpointname@[xx.xx.xx.xx], whereas nonbracketed endpoint IP addresses are displayed
as endpointname@xx.xx.xx.xx. Using this command allows the user to control whether IP addresses will
be bracketed or not, rather than entering all IP addresses as bracketed IP addresses.
Usage Examples
The following example disables bracketed IP address control:
(config)#no ip mgcp bracketed-ip
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1044