ADTRAN AOS Version R10.1.0 Command Reference Manual page 899

Command Reference Guide
boot config
Use the boot config command to modify system boot parameters by specifying the location and name of
primary and secondary configuration files. Use the no form of this command to use the default startup
configuration file. Variations of this command include:
boot config cflash <primary filename>
boot config cflash <primary filename> cflash <secondary filename>
boot config cflash <primary filename> flash <secondary filename>
boot config flash <primary filename>
boot config flash <primary filename> cflash <secondary filename>
boot config flash <primary filename> flash <secondary filename>
boot config flash <primary filename> usbdrive0 <secondary filename>
boot config usbdrive0 <primary filename>
boot config usbdrive0 <primary filename> flash <secondary filename>
boot config usbdrive0 <primary filename> usbdrive0 <secondary filename>
The cflash parameter is only valid for units with CompactFlash
The usbdrive0 parameter is only valid for units with Universal Serial Bus (USB) flash
drive capabilities.
Syntax Description
cflash
flash
usbdrive0
<primary filename>
<secondary filename>
Default Values
No default values are necessary for this command.
Command History
Release 14.1
Release 18.2
60000CRG0-35E
Specifies that the configuration file is located in CompactFlash memory.
Specifies that the configuration file is located in flash memory.
Specifies that the configuration file is located in USB flash drive memory.
Specifies the name of the primary configuration file (file names are case
sensitive).
Optional. Specifies the name of the backup configuration file.
Command was introduced.
Command was expanded to include USB flash drive memory.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
® capabilities.
899