Vlan Database - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide Enable Mode Command Set

vlan database

Use the vlan database command to enter the Virtual Local Area Network (VLAN) Database
Configuration mode. Refer to the section VLAN Database Command Set on page 2695 for more
information.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enters the VLAN Configuration mode:
>enable
#vlan database
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 847