ADTRAN AOS Version R10.1.0 Command Reference Manual page 405

Command Reference Guide
port-auth re-authenticate
Use the port-auth re-authenticate command to force the reauthentication of every currently authorized
host on all interfaces in the AOS unit. Variations of this command include:
port-auth re-authenticate
port-auth re-authenticate <interface>
Syntax Description
<interface>
Default Values
No default values are necessary for this command.
Command History
Release 18.3
Usage Examples
The following example specifies that the authorized hosts on the interface eth 1/1 are reauthenticated:
>enable
#port-auth re-authenticate eth 1/1
60000CRG0-35E
Optional. Specifies reauthentication of a specific interface. Interfaces are
specified in the format <interface type [slot/port | slot/port.subinterface id |
interface id | interface id.subinterface id | ap | ap/radio | ap/radio.vap]>. For
example, for a T1 interface, use t1 0/1; for an Ethernet subinterface, use
eth 0/1.1; for a PPP interface, use ppp 1; for an ATM subinterface, use atm
1.1; and for a wireless virtual access point, use dot11ap 1/1.1. Type
port-auth re-authenticate ? for a complete list of available interfaces.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
405