Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
ip sip proxy failover trust-domain
Use the ip sip proxy failover trust-domain command to enable the AOS unit to use P-Asserted Identity
Session Initiation Protocol (SIP) privacy when communicating with the softswitch when in failover mode.
Use the no form of this command to disable this feature. Variations of this command include:
ip sip proxy failover trust-domain
ip sip proxy failover trust-domain p-asserted-identity-required
Syntax Description
p-asserted-identity-required Specifies that P-Asserted-Identity is required for this domain.
Default Values
By default, this command is disabled.
Command History
Release 16.1
Command was introduced.
Functional Notes
The ip sip proxy failover trust-domain command allows the AOS unit to look at any P-Asserted-Identity
header the phones might send while the AOS device is in failover mode. The
p-asserted-identity-required parameter is only used with nonstandard softswitches and should not be
used in normal configurations.
Usage Examples
The following example specifies that P-Asserted-Identity is enabled:
(config)#ip sip proxy failover trust-domain
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1142
Advertisement
Table of Contents
