ADTRAN AOS Version R10.1.0 Command Reference Manual page 554

Command Reference Guide
show ip flow top-talkers
Use the show ip flow top-talkers command to view information pertinent to integrated traffic monitoring
(ITM) Top Talker configuration and to reveal possible configuration problems. Variations of this
command include:
show ip flow top-talkers
show ip flow top-talkers day
show ip flow top-talkers hour
show ip flow top-talkers day detail
show ip flow top-talkers hour detail
show ip flow top-talkers port
show ip flow top-talkers port detail
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines after.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
day
hour
port
detail
Default Values
No default values are necessary for this command.
Command History
Release 17.1
60000CRG0-35E
Optional. Specifies the display of Top Talker data for the current 24-hour
period.
Optional. Specifies the display of Top Talker data for the current hour.
Optional. Specifies the display of Top Talker monitored port traffic for the
current interval.
Optional. Specifies the display of information for previous and current
intervals.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
554