ADTRAN AOS Version R10.1.0 Command Reference Manual page 474

Command Reference Guide Enable Mode Command Set
show dos counters
Use the show dos counters command to display denial of service (DoS) attack statistics.
Syntax Description
No subcommands.
Default Values
By default, DoS protection in AOS is disabled.
Command History
Release 17.7 Command was introduced.
Usage Examples
The following example displays attack statistics for the AOS unit:
>enable
#show dos counters
DOS Fragment Error 0
DOS ICMP Error 0
DOS L3 Header Error 0
DOS L4 Header Error 1269620
DOS Source MAC equal Destination MAC 0
#
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 474