Show Lldp Neighbors - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show lldp neighbors

Use the show lldp neighbors command to display information about neighbors of this device learned
about via Link Layer Discovery Protocol (LLDP). Variations of this command include:
show lldp neighbors
show lldp neighbors detail
show lldp neighbors <interface>
show lldp neighbors interface <interface> detail
show lldp neighbors med
show lldp neighbors realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
detail
interface <interface>
med
realtime
Default Values
No default values are necessary for this command.
60000CRG0-35E
Optional. Shows detailed neighbor information for all LLDP neighbors or
neighbors connected to the specified interface or interface type.
Optional. Displays a summary of all neighbors learned about through the
specified interface. Specify an interface in the format <interface type
[slot/port | slot/port.subinterface id | interface id | interface id.subinterface id
| ap | ap/radio | ap/radio.vap]>. For example, for a T1 interface, use t1 0/1;
for an Ethernet subinterface, use eth 0/1.1; for a PPP interface, use ppp 1;
for an ATM subinterface, use atm 1.1; and for a wireless virtual access
point, use dot11ap 1/1.1. Type show lldp neighbors interface ? for a
complete list of applicable interfaces.
Optional. Displays neighbors that are capable of supporting LLDP-Media
Endpoint Discovery (LLDP-MED).
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
652