ADTRAN AOS Version R10.1.0 Command Reference Manual page 524

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
verbose
version
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 6.1
Release 9.1
Release 10.1
Release 11.1
Release 17.1
Release A5.01
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the terminal length command; refer to
page
837).
Usage Examples
The following are samples from various show interfaces commands:
>enable
#show interfaces t1 1/1
t1 1/1 is UP
T1 coding is B8ZS framing is ESF
Clock source is line FDL type is ANSI
Line build-out is 0dB
No remote loopbacks No network loopbacks
DS0 Status: 123456789012345678901234
NNNNNNNNNNNNNNNNNNNNNNNN
Line Status: -- No Alarms --
Current Performance Statistics:
60000CRG0-35E
Optional. Displays detailed configuration information on the terminal screen
(versus only the nondefault values).
Optional. Displays current version information (e.g., model and list number,
software version, etc.) for the interface.
Command was introduced.
Command was updated to include the performance-statistics parameter.
Command was expanded to include the high level data link control (HDLC)
and tunnel interfaces.
The realtime parameter and primary rate interface (PRI) were added.
Description, status, and verbose options were introduced. The demand,
foreign exchange office (FXO), and serial interfaces were added.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the extended parameter and Gigabit
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
terminal length <number> on
524

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents