ADTRAN AOS Version R10.1.0 Command Reference Manual page 890

Command Reference Guide
aaa processes <value>
Use the aaa processes command to set the number of threads available to the authentication, authorization,
and accounting (AAA) background processes. Use the no form of this command to return to the default
setting.
Syntax Description
<value>
Default Values
By default, the number of threads is set to 1.
Command History
Release 5.1
Functional Notes
Increasing the number of threads may speed up simultaneous authentication processes, but can do so at
the cost of system resources (for example, memory).
For more information about AAA, refer to the Configuring AAA in AOS configuration guide available online
at https://supportforums.adtran.com.
Usage Examples
The following example specifies five available threads for AAA background processes:
(config)#aaa processes 5
60000CRG0-35E
Specifies the number of threads available to the AAA subsystem. Range is
1 to 64 threads.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
890