ADTRAN AOS Version R10.1.0 Command Reference Manual page 1111

Command Reference Guide
ip sip default-call-routing
Use the ip sip default-call-routing command to specify the method used to route a call in the internal
transaction distribution unit (TDU) when the destination of a call is ambiguous. Use the no form of this
command to return to the default setting. Variations of this command include:
ip sip default-call-routing proxy
ip sip default-call-routing reject
ip sip default-call-routing switchboard
Syntax Description
proxy
reject
switchboard
Default Values
By default, the call routing method is proxy.
Command History
Release 16.1
Functional Notes
The ip sip default-call-routing command is applicable to AOS voice products only. This command is not
available on AOS data products.
Usage Examples
The following example specifies that calls are routed to an internal switchboard:
(config)#ip sip default-call-routing switchboard
60000CRG0-35E
Specifies that the call is routed to a proxy server.
Specifies that the call is rejected.
Specifies that the call is routed to an internal switchboard.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1111