ADTRAN AOS Version R10.1.0 Command Reference Manual page 511

Command Reference Guide
show hmr
Use the show hmr command to display Session Initiation Protocol (SIP) header manipulation rules (HMR)
statistics from traffic to which an HMR policy is applied. The output can be filtered based on policy, policy
user, rule set, direction, and message type. In addition, you can sort the output by policy, policy user, rule
set, direction, or message type. This command can be used to determine the activity of an HMR policy,
where they policy is most used, and by whom. Variations of this command include:
show hmr
show hmr direction in
show hmr direction out
show hmr message-type request
show hmr message-type response
show hmr policy <name>
show hmr rule-set <name>
show hmr sort direction in
show hmr sort direction out
show hmr sort message-type request
show hmr sort message-type response
show hmr sort policy <name>
show hmr sort user
show hmr user global
show hmr user proxy-server
show hmr user proxy-user
show hmr user <user>
Each of the show hmr command variations can be used multiple times within a single
command. For example, you can display SIP HMR statistics for a specified policy and
direction by entering show hmr policy MYPOLICY1 direction in.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
direction in
direction out
message-type request
60000CRG0-35E
Optional. Limits the command output to SIP HMR statistics for inbound SIP
traffic.
Optional. Limits the command output to SIP HMR statistics for outbound
SIP traffic.
Optional. Limits the command output to SIP HMR statistics for request
messages.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
511