ADTRAN AOS Version R10.1.0 Command Reference Manual page 645

Command Reference Guide
show isdn-number-template
Use the show isdn-number-template command to display integrated services digital network (ISDN)
number templates. Variations of this command include:
show isdn-number-template
show isdn-number-template <value>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Release 17.1
Usage Examples
The following example displays information for ISDN number template 0:
>enable
#show isdn-number-template 0
Type ID
Subscriber 0
#
60000CRG0-35E
Optional. Displays information about a specific number template. Valid
range is 1 to 255.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Prefix Pattern
911
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
645