ADTRAN AOS Version R10.1.0 Command Reference Manual page 248

Command Reference Guide
debug efm oam
Use the debug efm oam command to enable debug messaging for all Ethernet in the first mile (EFM)
operations, administration, and management (OAM) and pre-provisioning components configured on the
unit. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release A4.05
Usage Examples
The following example enables debug messaging for all EFM OAM components:
>enable
#debug efm oam
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
248