ADTRAN AOS Version R10.1.0 Command Reference Manual page 815

Command Reference Guide
show voice spre
Use the show voice spre command to display all special prefix (SPRE) code mappings. Functions with no
SPRE code assigned are not displayed. Variations of this command include:
show voice spre local
show voice spre network
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
local
network
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 17.1
Usage Examples
The following example displays all local SPRE codes:
>enable
#show voice spre local
Current SPRE Handling Mode: Local
SPRE Code
-------------------------------------------------------------------------------------------------------------------
**
*20n
*22xxxx
*35
*36xxxx*pppp*
*39x
60000CRG0-35E
Displays all SPRE codes used locally.
Displays all SPRE codes passed through to the network.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Description
Hands Free Auto-Answer
System Mode 0=Deflt, 1=Night, 2=Wknd, 3=Lunch, 7=Override
Billing Code
Call Forward Cancel
Remote Call Forward Cancel
Do Not Disturb Enable/Disable
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
815