ADTRAN AOS Version R10.1.0 Command Reference Manual page 190

Command Reference Guide
The following example replaces the startup configuration file with the file newconfig.txt:
>enable
#copy cflash newconfig.txt startup-config
The following example copies the file myfile.biz (located on the CompactFlash card) to the specified TFTP
server:
>enable
#copy cflash tftp
Address of remote host?10.200.2.4
Source filename myfile.biz
Destination filename myfile.biz
Initiating TFTP transfer...
Received 45647 bytes.
Transfer Complete!
>enable
#copy cflash xmodem
Source filename myfile.biz
Begin the Xmodem transfer now...
Press CTRL+X twice to cancel
CCCCCC
AOS is now ready to transmit the file on the CONSOLE port (using the XMODEM protocol). The next step
in the process may differ depending on the type of terminal emulation software you are using. For
HyperTerminal, you will now select Transfer > Receive File and select the destination. Once the transfer
is complete, information similar to the following is displayed:
Received 231424 bytes.
Transfer complete
60000CRG0-35E Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
190