ADTRAN AOS Version R10.1.0 Command Reference Manual page 980

Command Reference Guide
interface range <interface type> <slot/port> - <slot/port>
Use the interface range command to enter configuration mode for a range of interfaces.
Syntax Description
<interface type>
<slot/port>
<slot/port>
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release 11.1
Release 14.1
Release 18.2
Functional Notes
All configuration changes made in this mode will apply to all interfaces in the range specified.
Usage Examples
The following example selects seven consecutive Ethernet ports for configuration:
(config)#interface range eth 0/3-0/12
(config-eth 0/3-12)#
The following example selects nonconsecutive Ethernet ports for configuration:
(config)#interface range eth 0/14, 0/16, 0/18
(config-eth 0/14, 0/16, 0/18)#
60000CRG0-35E
Specifies the interface type (e.g., Ethernet, Gigabit Ethernet, etc.). Type
interface range ? for a complete list of valid interfaces.
Specifies the slot/port number of the first interface in the desired range of
interfaces to be configured, followed by a hyphen (-) for consecutive ports
or a comma (,) for nonconsecutive ports.
Specifies the slot/port number of the last interface in the desired range of
interfaces to be configured.
Command was introduced.
Command was expanded to include the foreign exchange office (FXO)
range.
Command was expanded to include the Gigabit Ethernet interfaces.
Command was expanded to include the Single-Pair High-Speed Digital
Subscriber Line (SHDSL) interface.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
980