ADTRAN AOS Version R10.1.0 Command Reference Manual page 801

Command Reference Guide
show voice match
Use the show voice match command to display voice automatic number identification (ANI) substitution
parameters. Variations of this command include:
show voice match
show voice match ani <template>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
match
ani <template>
Default Values
No default values are necessary for this command.
Command History
Release A2
Functional Notes
Examples and rules of use.
MATCH #
1. 256-963-XXXX
2. NXX-NXX-XXXX 9-1-NXX-NXX-XXXX
3. $
MATCH Number Rules -
1. All "," characters are ignored.
2. All "[" and "]" brackets must match and contain numbers only [123].
3. If using a "$" wildcard, it is the only character allowed.
4. "X" matches [0-9], "N" matches [2-9].
60000CRG0-35E
Displays all substitution configurations.
Optional. Displays a specific ANI substitution entry.
Command was introduced.
SUBST #
9-963-XXXX
9$
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
801