ADTRAN AOS Version R10.1.0 Command Reference Manual page 835

Command Reference Guide
telnet stack-member <unit id>
Use the telnet stack-member command to Telnet to a stack member.
Syntax Description
<unit id>
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Functional Notes
This command is only available when in stack-master mode.
Usage Examples
The following example Telnets to a member of the stack:
>enable
#telnet stack-member 3
Trying Stack Member 3...Press Ctrl+C to abort
60000CRG0-35E
Specifies unit ID of the stack member to connect via a Telnet session.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
835