ADTRAN AOS Version R10.1.0 Command Reference Manual page 226

Command Reference Guide
debug auto-link
Use the debug auto-link command to display event messages for the auto-link feature configuration.
Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.3/A2
Usage Examples
The following example activates auto-link debug messages:
>enable
#debug auto-link
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
226