ADTRAN AOS Version R10.1.0 Command Reference Manual page 1112

Command Reference Guide
ip sip grammar alert-info url <url>
Use the ip sip grammar alert-info url command to specify the Alert-Info header host in outbound Session
Initiation Protocol (SIP) messages. Use the no form of this command to return to the default setting.
Syntax Description
<url>
Default Values
By default, the local loopback address is the host in the Alert-Info header (127.0.0.1).
Command History
Release 13.1
Usage Examples
The following example sets the Alert-Info header to use a specific URL as shown in the sample header
below:
(config)#ip sip grammar alert-info url www.notused.com
Sample header:
Alert-Info:<http://www.notused.com>;info=alert-internal
60000CRG0-35E
Specifies an Hypertext Transfer Protocol (HTTP) uniform resource locator (URL)
to be used in the Alert-Info header for IP phone tone.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1112