ADTRAN AOS Version R10.1.0 Command Reference Manual page 808

Command Reference Guide
show voice quality-stats
Use the show voice quality-stats command to display voice quality statistical information. Variations of
this command include the following:
show voice quality-stats
show voice quality-stats active
show voice quality-stats active realtime
show voice quality-stats <ID>
show voice quality-stats <ID> realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
active
<ID>
realtime
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Release 17.1
60000CRG0-35E
Displays all quality statistics for active calls.
Specifies an identity number of a call to obtain detailed statistics.
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
808