ADTRAN AOS Version R10.1.0 Command Reference Manual page 330

Command Reference Guide
debug isdn group
Use the debug isdn group command to activate integrated services digital network (ISDN) group errors
and messages. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages. Variations of this command include:
debug isdn group
debug isdn group <number>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<number>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates debug messages for all ISDN groups:
>enable
#debug isdn group
60000CRG0-35E
Optional. Specifies the ISDN group. Valid range is 1 to 255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
330