ADTRAN AOS Version R10.1.0 Command Reference Manual page 352

Command Reference Guide
debug probe responder
Use the debug probe responder command to display probe responder event messages or activate debug
messages associated with activities performed by the named probe object. Debug messages are displayed
(real time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug
messages. Variations of this command include:
debug probe responder twamp
debug probe responder twamp control
debug probe responder twamp control event
debug probe responder twamp control event <address>
debug probe responder twamp control packet
debug probe responder twamp control packet <address>
debug probe responder twamp test
debug probe responder twamp test event
debug probe responder twamp test event <address>
debug probe responder twamp test packet
debug probe responder twamp test packet <address>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
twamp
control
event <address>
packet <address>
test
event <address>
packet <address>
Default Values
By default, all debug messages in AOS are disabled.
60000CRG0-35E
Optional. Activates probe debug messages for all Two-Way Active
Measurement Protocol (TWAMP) responder verbose output.
Optional. Activates probe debug messages for TWAMP control responder
verbose output.
Optional. Activates probe debug messages for TWAMP control responder
events. Specify the far-end IP address to activate remote events.
Optional. Activates probe debug messages to decode TWAMP control
packets. Enter an IP address to decode TWAMP control packets from a
specific address.
Optional. Activates probe debug messages for TWAMP test responder
verbose output.
Optional. Activates probe debug messages for TWAMP test responder
events. Enter a far-end IP address to display events from the specified
address.
Optional. Activates probe debug messages to decode TWAMP test packets.
Enter an IP address to decode TWAMP test packets from a specific
address.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
352