ADTRAN AOS Version R10.1.0 Command Reference Manual page 215

Command Reference Guide
copy usbdrive0
Use the copy usbdrive0 command to copy files located in Universal Serial Bus (USB) flash drive memory
to a specified destination.
Variations of this command include:
copy usbdrive0 <source file> boot
copy usbdrive0 <source file> flash
copy usbdrive0 <source file> flash <new file>
copy usbdrive0 <source file> http <url>
copy usbdrive0 <source file> http <url> port <port>
copy usbdrive0 <source file> https <url>
copy usbdrive0 <source file> https <url> port <port
copy usbdrive0 <source file> startup-config
copy usbdrive0 <source file> usbdrive0 <new file>
copy usbdrive0 tftp
copy usbdrive0 xmodem
Syntax Description
<source file>
<new file>
boot
flash
http <url>
https <url>
iport <port>
startup-config
tftp
60000CRG0-35E
Specifies the name of the file (located in flash memory) to copy.
Saves the file using the specified file name.
Copies the specified source file and overwrites the boot read only memory
(ROM).
Copies the specified file and saves it to flash memory.
Copies the specified source file and transfers it to a Hypertext Transfer
Protocol (HTTP) server using the specified HTTP server uniform resource
locator (URL). Use HTTP PUT operation.
Copies the specified source file and transfers it to a secure socket
Hypertext Transfer Protocol Secure (HTTPS) server using the specified
HTTPS server URL. Use HTTPS PUT operation.
Optional. Specifies the port used to transfer the specified file to an HTTP or
HTTPS server. Range is 0 to 65335.
Replaces the startup configuration file with a copy of the specified file.
Copies any file located in USB flash drive memory to a specified Trivial File
Transfer Protocol (TFTP) server.
After entering copy usbdrive0 tftp, AOS prompts for the following
information:
Address of remote host: Specifies the IP address of the TFTP server.
Source filename:
Destination filename:
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
Specifies the name of the file (located in USB flash
drive memory) to copy to the TFTP server.
Specifies the file name to use when storing the
copied file on the TFTP server. (The file will be
placed in the default directory established by the
TFTP server.)
215