ADTRAN AOS Version R10.1.0 Command Reference Manual page 1126

Command Reference Guide
ip sip location
Use the ip sip location command to manually add a Session Initiation Protocol (SIP) user agent (UA) to
the location database. Use the no form of this command to disable this feature. Variations of this command
include:
ip sip location <username> <ip address>
ip sip location <username> <ip address> <port>
ip sip location <username> <ip address> <port> tcp
ip sip location <username> <ip address> <port> tcp <number>
ip sip location <username> <ip address> <port> udp
ip sip location <username> <ip address> <port> udp <number>
Syntax Description
<username>
<ip address>
<port>
tcp
udp
<number>
Default Values
By default, this command is disabled.
Command History
Release 11.1
Release 15.1
Usage Examples
The following example specifies an IP SIP location of 192.33.5.99 for a user named 2001:
(config)#ip sip location 2001 192.33.5.99
60000CRG0-35E
Specifies the user name for the UA being added to the location database.
Specifies the IP address for the UA being added to the location database.
IP addresses should be expressed in dotted decimal notation (for example,
10.10.10.1).
Optional. Specifies the port of the UA to add to the database. If no port is
specified, default port is 5060.
Optional. Specifies the use of Transmission Control Protocol (TCP) for
session communication.
Optional. Specifies the use of User Datagram Protocol (UDP) for session
communication.
Optional. Specifies the time in seconds that a user is stored in the database.
Range from 0 to 36000. If no time is specified, default time is zero seconds.
Command was introduced.
Command was expanded to include a choice of transport protocols and
expiration time.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1126