ADTRAN AOS Version R10.1.0 Command Reference Manual page 239

Command Reference Guide
debug dns-client
Use the debug dns-client command to activate debug messages associated with domain naming system
(DNS) client operation in AOS. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 3.1
Release 18.3
Release R10.1.0
Functional Notes
The debug dns-client command activates debug messages to provide information on DNS client activity
in AOS. The IPv4 and IPv6 DNS capability allows for DNS-based host translation (name-to-address).
Usage Examples
The following example activates debug messages associated with DNS client activity:
>enable
#debug dns-client
60000CRG0-35E
Command was introduced.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
239