ADTRAN AOS Version R10.1.0 Command Reference Manual page 902

Command Reference Guide
The usbdrive0 parameter is only valid for units with Universal Serial Bus (USB) flash
drive capabilities.
Syntax Description
cflash
flash
no-backup
<primary filename>
<secondary filename>
verify
usbdrive0
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 12.1
Release 18.2
Functional Notes
Detailed instructions for upgrading AOS and loading files into flash memory are found on the AOS
Documentation CD.
Usage Examples
The following example specifies myimage.biz (located in CompactFlash memory) as the primary image
file with no backup image:
(config)#boot system cflash myimage.biz no-backup
The following example specifies myimage.biz (located in flash memory) as the primary image file with no
backup image:
(config)#boot system flash myimage.biz no-backup
The following example specifies myimage.biz (located in flash memory) as the primary image file and
mybackupimage.biz (also located in flash memory) as the backup image:
(config)#boot system flash myimage.biz mybackupimage.biz
60000CRG0-35E
Specifies the system image is located in CompactFlash memory.
Specifies the system image is located in flash memory.
Specifies that there is no backup image present.
Specifies the file name of the image (file names are case sensitive). Image
files should have a .biz extension.
Specifies a name for the backup image.
Optional. Verifies the image checksum.
Specifies the system image is located in USB flash drive memory.
Command was introduced.
Command was expanded to include CompactFlash.
Command was expanded to include USB flash drive memory.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
902