ADTRAN AOS Version R10.1.0 Command Reference Manual page 185

Command Reference Guide
configure
Use the configure command to enter the Global Configuration mode or to configure the system from
memory. Refer to Global Configuration Mode Command Set on page 852
of this command include:
configure memory
configure network
configure overwrite-network
configure terminal
Syntax Description
memory
network
overwrite-network
terminal
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Usage Examples
The following example enters the Global Configuration mode from the Enable mode:
>enable
#configure terminal
(config)#
60000CRG0-35E
Configures the active system with the commands located in the default
configuration file stored in nonvolatile random access memory (NVRAM).
Configures the system from a Trivial File Transfer Protocol (TFTP) network
host.
Overwrites NVRAM memory from a TFTP network host.
Enters the Global Configuration mode.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
for more information. Variations
185