ADTRAN AOS Version R10.1.0 Command Reference Manual page 1046

Command Reference Guide
ip mgcp call-agent secondary <hostname | ipv4 address>
Use the ip mgcp call-agent secondary command to specify the secondary Media Gateway Control
Protocol (MGCP) call agent host name. Use the no form of this command to remove the specified
secondary call agent.
Syntax Description
<hostname | ipv4 address>
Default Values
By default, no secondary call agents are configured.
Command History
Release A2
Functional Notes
Multiple secondary call agent host names can be configured. If a connection with the primary call agent
fails, call agents are tried in the order they are entered in the configuration. New secondary call agents are
added at the end of the list.
If secondary call agents are configured, primary call agents cannot be removed. For more
information about primary call agents, refer to the command
<hostname | ipv4 address> on page
Usage Examples
The following example specifies the secondary MGCP call agent as ca2.company.com:
(config)#ip mgcp call-agent secondary ca2.company.com
60000CRG0-35E
Specifies the call agent host name. Host names can be entered as either a
fully qualified domain name (FQDN) or as an IP version 4 (IPv4) address in
dotted decimal notation (XX.XX.XX.XX).
Command was introduced.
1045.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip mgcp call-agent primary
1046