ADTRAN AOS Version R10.1.0 Command Reference Manual page 1096

Command Reference Guide
ip rtp quality-monitoring threshold lq-mos
Use the ip rtp quality-monitoring threshold lq-mos command to specify threshold values for logging
listening quality (LQ) mean opinion score (MOS) events during voice quality monitoring (VQM). When
the call quality detected in the Realtime Transport Protocol (RTP) stream is less than the specified event
threshold, an event message is generated. Use the no form of this command disables the event reporting for
that message type and threshold. Variations of this command include:
ip rtp quality-monitoring threshold lq-mos error
ip rtp quality-monitoring threshold lq-mos error <value>
ip rtp quality-monitoring threshold lq-mos info
ip rtp quality-monitoring threshold lq-mos info <value>
ip rtp quality-monitoring threshold lq-mos notice
ip rtp quality-monitoring threshold lq-mos notice <value>
ip rtp quality-monitoring threshold lq-mos warning
ip rtp quality-monitoring threshold lq-mos warning <value>
Syntax Description
error
info
notice
warning
<value>
Default Values
By default, the LQ MOS thresholds are info 4.40, notice 4.00, warning 3.60, and error 2.60.
Command History
Release 17.1
Usage Examples
The following example enables VQM LQ MOS info messages to be logged if LQ MOS scores fall below
4.25:
(config)#ip rtp quality-monitoring threshold lq-mos info 4.25
60000CRG0-35E
Specifies the threshold for LQ MOS error messages to be logged.
Specifies the threshold for LQ MOS information messages to be logged.
Specifies the threshold for LQ MOS notice messages to be logged.
Specifies the threshold for LQ MOS warning messages to be logged. .
Optional. The range is 0 to 4.4.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1096