ADTRAN AOS Version R10.1.0 Command Reference Manual page 881

Command Reference Guide Global Configuration Mode Command Set
aaa authorization config-command
Use the aaa authorization config-command command to enable or disable authorization for
configuration mode commands in AOS authentication, authorization, and accounting (AAA) services. This
command is used to verify that command-level authorization is enabled before applying AAA command
authorization method lists to a specific line interface. Use the no form of this command to disable
authorization for configuration commands.
Syntax Description
No subcommands.
Default Values
By default, authorization for configuration commands is enabled.
Command History
Release 11.1 Command was introduced.
Functional Notes
The aaa authorization config-command command is used to ensure that authorization for configuration
commands is enabled at the global level before applying any AAA authorization method lists to a line
interface (console, Telnet, or secure shell (SSH)). This feature must be enabled before AAA authorization
method lists can be applied to the interface.
For more information about AAA authorization, or AAA configuration in general, refer to the Configuring
AAA in AOS configuration guide available online at https://supportforums.adtran.com.
Usage Examples
The following example enables authorization of configuration mode commands:
(config)#aaa authorization config-command
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 881