ADTRAN AOS Version R10.1.0 Command Reference Manual page 358

Command Reference Guide
debug sip
Use the debug sip command to activate debug messages associated with Session Initiation Protocol (SIP)
events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages. Variations of this command include:
debug sip cldu
debug sip location
debug sip manager
debug sip name-service
debug sip syntax
debug sip tdu
debug sip trunk-registration
debug sip trunk-registration <Txx>
debug sip trunk-registration <Txx> <trunk id>
debug sip user-registration
debug sip user-registration <extension>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
cldu
location
manager
name-service
syntax
tdu
trunk-registration
trunk-registration <Txx>
trunk-registration <Txx> <trunk id> Optional. Activates SIP trunk-registration event debug messages
user-registration
user-registration <extension>
Default Values
By default, all debug messages in AOS are disabled.
60000CRG0-35E
Activates SIP CLDU event debug messages.
Activates SIP location database event debug messages.
Activates SIP stack manager event debug messages.
Activates SIP name-service event debug messages.
Activates SIP syntax event debug messages.
Activates SIP transaction distribution unit (TDU) debug messages.
Activates all SIP trunk-registration event debug messages.
Optional. Activates SIP trunk-registration event debug messages
for a specific trunk. For example: Txx (T01) where xx is the trunk's
two-digit identifier.
for a specific trunk. For example: Txx (T01) where xx is the trunk's
two-digit identifier and <trunk id> is the specific name associated
with the trunk.
Activates all SIP user-registration event debug messages.
Optional. Activates SIP user-registration event debug messages for
a specific trunk.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
358