ADTRAN AOS Version R10.1.0 Command Reference Manual page 287

Command Reference Guide
debug ip ftp-server
Use the debug ip ftp-server command to activate debug messages associated with File Transfer Protocol
(FTP) server events in the AOS device. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 13.1
Functional Notes
The debug ip ftp-server command activates debug messages to provide information on FTP server
activity in AOS. The FTP server capability allows for fast file management and transport for local or remote
devices.
Usage Examples
The following example activates debug messages associated with FTP server activity:
>enable
#debug ip ftp-server
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
287