ADTRAN AOS Version R10.1.0 Command Reference Manual page 201

Command Reference Guide
Syntax Description
cflash
<destination file>
dynvoice-config
flash
force-overwrite
http <url>
port <port>
ramdisk
running-config
startup-config
usbdrive0
Default Values
By default, the port value is 80.
Command History
Release 16.1
Release 17.7
Release 18.2
Usage Examples
The following example replaces the current running configuration file with newconfig.txt from the HTTP
server (10.200.2.4):
#copy http http://10.200.2.4/newconfig.txt running-config
Initiating HTTP transfer...
Received 4562 bytes.
Transfer Complete!
#
The following example copies the file myfile.biz from the HTTP server (10.200.2.4) and saves it
CompactFlash memory (naming the copy newfile.biz):
#copy http http://10.200.2.4/SomeDirectory/AnotherDirectory/myfile.biz cflash newfile.biz
Initiating HTTP transfer...
Received 45647 bytes.
Transfer Complete!
60000CRG0-35E
Copies a file from the HTTP server to the CompactFlash card.
Specifies the new name of the file after it is copied.
Specifies that the file copied from the HTTP server overwrite the dynamic
voice configuration file.
Copies a file from the HTTP server to the flash memory.
Optional. Specifies a force override to copy the file.
Specifies the URL of the HTTP server.
Optional. Specifies the port used to transfer the specified file from an HTTP
server. Range is 0 to 65335.
Copies a file from the HTTP server to the volatile RAM disk.
Replaces the active running configuration with the file copied from the
HTTP server.
Replaces the startup configuration with the file copied from the HTTP
server.
Copies a file from the HTTP server to the USB flash drive memory.
Command was introduced.
Command was expanded to include the ramdisk parameter.
Command was expanded to include the USB flash drive memory.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
201