Show Qos Map - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show qos map

The show qos map command outputs information about the quality of service (QoS) map. This
information differs based on how a particular map entry is defined. Variations of this command include the
following:
show qos map
show qos map <name>
show qos map <name> <number>
show qos map interface <interface>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<name>
<number>
interface <interface>
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release 9.1
Release 11.1
Release 17.1
Release A4.01
60000CRG0-35E
Optional. Specifies the name of a defined QoS map.
Optional. Specifies one of the map's defined sequence numbers.
Optional. Displays the QoS map information for a specific interface. Specify
an interface in the format <interface type [slot/port | slot/port.subinterface id
| interface id | interface id.subinterface id | ap | ap/radio | ap/radio.vap]>. For
example, for a T1 interface, use t1 0/1; for an Ethernet subinterface, use
eth 0/1.1; for a PPP interface, use ppp 1; for an ATM subinterface, use
atm 1.1; and for a wireless virtual access point, use dot11ap 1/1.1. Type
show qos map interface ? command for a complete list of interfaces.
Command was introduced.
Command was expanded to include the high level data link control (HDLC)
interface.
Demand interface was added.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the Metro Ethernet Forum (MEF) Metro
Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
710